* LinkStation Series Firmware Updater Ver.1.64

 Name         LinkStation Series Firmware Updater
 Version      Ver.1.64
 File         LS_SERIES-164_fwmac.dmg
 Size         292,400,367 Bytes
 Date         December 17, 2012
 Platform     Intel Mac
 OS           Mac OS X 10.3.9 or later
 Model        LS-WXL, LS-VL, LS-WVL, LS-QVL, LS-XL, LS-WSXL Series
 Copyright    BUFFALO INC.
 Distribution Distribution DMG archive
 Condition    Re-distribution is not allowed.
 Manual       Quick Setup Guide
              Reference Guide
 This product uses GPL/LGPL applicable software and your are welcome to
 have, modify and redistribute these source codes.
 Please ask our technical support people about modified GPL, applicable
 module and how to deliver them. You may be charged for delivery cost.

[Software description]
This software is LinkStation Series Firmware Update Utility to update unit firmware to Ver.1.64.
If your unit firmware is Ver.1.64 or later version, you do not have to use this utility.

* If the LinkStation became EM Mode, firmware update might recover the unit.

[How to confirm firmware version]
Select LinkStation from NAS Navigator2 utility search screen.
The firmware version is displayed right and bottom corner in the status screen.
If the unit name shown LS-***-EM*** in the status screen, the LinkStation becomes EM (Emergency) mode.

[Caution]
- Please consult you local representative if you experience malfunction problem cause by firmware update.
- Do not turn the unit off until complete messages appear. It might takes several minutes in the case.
- After Ver.1.51, due to adding online update features and error and information codes,
  when TeraStation detects the online update, the message 

    "152:Unknown error occurred"

  is displayed depending on the version of the NAS Navigator2 you are using.
  Please update to the latest NAS Navigator2.

[How to use updater]
1. Extract the file you have downloaded.
2. Please execute "update", refer to the screen instruction.

[Firmware Release Note]
Version 1.64 [2012.12.17]
 - Fixed bug where building a RAID array could fail, leaving a drive that could not be formatted or removed.
 - Fixed bug where login could fail because of configuration file corruption after a firmware update.
 - Fixed bug where LS-XL could fail to shut down when WebAccess was enabled with version 1.62 or later.
 - Fixed bug where BitTorrent might not start downloading in a specific area.
 - Fixed bug where FLAC, MP3, WMA, and Ogg files might not be correctly sorted in order of track numbers on the DLNA media player if Media Server is enabled.
 - Updated Samba version to 3.6.
 - Active Directory (Windows Server 2008 and Windows Server 2008R2) participation is improved. Examples: NAS participates AD or PC connects with NAS.


Version 1.64 (DTCP-IP: 1.64-20121203) DTCP-IP Update
 - Fixed bug where NAS freezes showing "Updating program information..." on recorded program list.
 - Fixed bug where DLNA media player cannot operate for contents list if media server public folders are deleted.
 - Fixed bug where FLAC, MP3, WMA, and Ogg files might not be correctly sorted in order of track numbers on the DLNA media player if Media Server is enabled.


Version 1.63 [2012.10.30]
 - Improves file transfer speed by SMB.